SGIAN DUBHS, SGIAN BREWS, DIRKS & DAMASCUS STEEL

We offer traditional, compliant length Sgian Dubhs in Stainless and Hi Carbon Damascus Steel, both as bare blades or with "kit" items such as handle blanks in selected hardwoods, plain and Celtic pattern embossed leather scabbards - and - (arriving soon) high quality, attractive cardboard presentation cases.
Stag antler handles are also available, with crown ( strictly limited availability )or plain rolls ( good availability).
Bulk and trade orders are easily catered for - please enquire individually with us if this type of volume is required.

AE Damascus bar

AE Damascus bar

"AE" 15N20 Hi carbon/Nickel bar.

Ladder pattern

We carry 18" x 1.5" ( width ) billets of this material and will cut from these to a minimum length of 4".

Annealled, surface ground.

Basic hardening and tempering will be required to achieve full functionality.

18" Full bar: £99.50 each
 
9" half bar: £55.00 each
 
6" third bar: £37.50 each
 
4": £25.00 each
 

Hi Carbon Damascus bar - 1/8"

Hi Carbon Damascus bar - 1/8"

Nominal lengths to 40" available.

1.5" width, 1/8" thickness

Hi carbon tool steel 01 & 1095 mix giving good tight Bird's Eye pattern.

Illustration shows surface of ground and acid treated bar before hardening.

Material will require basic hardening and tempering ahead of use.

Priced per inch

Price: £2.95 each
 

Hi Carbon Damascus bar - 1/4"

Hi Carbon Damascus bar - 1/4"

Nominal lengths to 40" available.

1.5" width, 1/4" thickness

Hi carbon tool steel 01 & 1095 mix giving good tight Bird's Eye pattern.

Illustration shows surface of ground and acid treated bar before hardening.

Material will require basic hardening and tempering ahead of use.

Priced per inch

Price: £3.25 each
 

TRADITIONAL 12" DIRK

TRADITIONAL 12" DIRK

Full, traditional 12" Scottish Dirk.

Full blood groove and jimps with stick tang.

We stock these to "the trade" in either Hi carbon Damascus (Bird's Eye pattern) or stainless format.

Complimentary leather scabbard with all blades sold.

Retail rates given below - please enquire with us if your interest is for trade volumes.

Damascus Dirk c/w scabbard: £44.95 each
 
Stainless Dirk c/w scabbard: £20.95 each
 

SGIAN DUBH, TRADITIONAL 3.5

SGIAN DUBH, TRADITIONAL 3.5

Compliant 3.5" blades.
Traditional pattern with full blood groove and jimps.
Highly polished steel. Two widths - 23mm and 25mm, measured across top of blade.
Stick tang may be fitted easily to choice of handle in traditional manner of assembly with appropriate ( epoxy ) adhesive.
Trade terms available where appropriate - MOQ's will apply ( enquire please )

SGIAN DUBH 25mm : £4.95 each
 
SGIAN DUBH 23mm : £4.95 each
 

SGIAN BREW ( DAMASCUS STEEL)

SGIAN BREW ( DAMASCUS STEEL)


Increasingly sought after "Sgian Brew" in tight, Hi Nickel ladder type pattern damascus steel. 80mm "blade" ( blunt to suit the bottle tops!!! ) and 45mm tang.
Have not been hardened but perfectly adequate as they are. Take a nice "blued" hardening ( easily done - ask us for advice ) if so desired.
Also in plain polished steel ( not shown )

Damascus Sgian Brew: £16.95 each
 
Plain Sgian Brew: £4.95 each
 

Damascus Sgian Dubh

Damascus Sgian Dubh

Traditional pattern Sgian Dubh in Bird's Eye / Raindrop pattern Hi Carbon Damascus steel. 1" width at hilt end, substantial stick tang. Blade is 3.5" in length, tang a further 2 1/4". Blood groove and jimps to traditional format. These blades have not been heat treated, so may be hardened by being put through this type of process if you wish. Neither are they sharpened. We take the view that as they are more decorative than they are functional, then the combination of dull edge / non hardened is perfectly acceptable. Furthermore, the excercises of hardening and subsequent sharpening may well be part of the process that you as the buyer of these "top end" blades that you wish to undertake to your own standards. We can advise on the simple process of hardening should you require but we do not offer to do this on your behalf.

Handle blocks, scabbards and presentation boxes to complete your Sgian Dubh project are shown in the categories below......


Price: £18.95 each
 

SGIAN DUBH SHEATHS

SGIAN DUBH SHEATHS



Carefully hand stitched full grain leather sheaths. Choose from Plain or Trinity Knot ( Celtic Knot ) embossed. We've found that whilst these are well finished, all scabbards may be greatly enhanced with a little careful polishing ( just like shoes!!!)

Sgian Scabbard Knot: £2.95 each
 
Sgian Scabbard Plain: £2.95 each
 
Sgain Scabbard Knot (5): £12.50 each
 
Sgian Scabbard Plain (5): £12.50 each
 

PRESENTATION CASE - SGIAN DUBH

PRESENTATION CASE - SGIAN DUBH





Substantial, hand assembled cardboard cases covered in either Red, Green or Black textured paper. Polyester wool insert - use to prop up item for display or assist in protecting for shipping.

Cases are lidded (fully detatchable)and approx 200L x 50W x 25D

Enquire with us for trade discounts ( 25 pieces or more )


Sgian case - Black: £1.25 each
 
Sgian case - Green: £1.25 each
 
Sgian case - Red: £1.25 each
 
Sgian case - Black (5) : £5.00 each
 
Sgian case - Green (5) : £5.00 each
 
Sgian case - Red (5): £5.00 each
 
Sgian case - mix cols (5): £5.00 each
 

A short sale until July 6th. Substantial reduction to shanks - across the range and a few other random items ( stock reduction) thrown in for good measure !!

 

Ordering - How it Works

1. Browse the categories, adding the items that interest you to the cart. 

2. Submit the order to us with your full contact details. 

3. We assess the order and  calculate the most cost effective carriage option.

4. Finally, we contact you, advise the preferred carriage option and request payment.

 

Highland Horn Company Ltd, Taigh na Corrach, Knockmuir Brae, Avoch, Ross-Shire, Scotland IV9 8RD

Tel: +44 (0)1381 622488 Fax: 0845 280 2225 Email:

Copyright Highland Horn Company Ltd. © 2017   |   Terms & Conditions   |   Website by plexus media