Superior, thick walls and bases. Go metric and put truly cost effective and durable ferrules on your sticks. Mixed sensible sizes from 15mm thru' to 25mm. If this doesn't suit give us a call or drop your sizings in on the end of your order online + we'll make the selection up as suits you.
"Better for less".
Need more - no problem!!!, we have 300,000+ in stock .... drop us a note of your quantities and let us pleasantly surprise you how little it'll cost. Best trade rates on 100 min order any one size..£enquire!!!

STANDARD SELECTION MOST POPULAR SIZES ONLY ( 17.5 - 20.5mm )**

After years of enquiries, we have yielded to pressure and initiated the production of our own "Ultra" hard wearing ferrules.

Everything below that little line at the base of the ferrule is solid brass - 4mm thick to be precise!
Absolute one piece production, no welds, no seams, just one piece, solid, hard wearing ferrule.
Initial production of the most sought after sizes only - sized by outer top diameter.
Full range of sizes 15 - 25mm available from Mid January 2010

Black ( buffalo horn - shown left )

White ( peroxide treated buffalo bone - shown right )

Mixed ( both )

All pieces are nominally 30mm diameter and 6 - 7mm thick.

Bagged in 50's ( average bag contents by weight )

Carefully machined, strong, reliable tapped and threaded brass connectors.

Plain (shown top) has 8mm threaded brass centre section, tapped all the way through heavier surround section. Ideal where you intend to use with your own spacer material or in invisible joints.

Flanged (shown bottom) - 25mm diameter centre flange with special 8mm steel centre section for added strength. Tapped all the way through, so may be cut long or short, top or bottom, to suit the balance of the individual stick.
Universally popular in the make up of sticks for the travelling sportsman, where sustained, dependable hard use is anticipated and breakdown for the suitcase required at the end of the trip!

Cost effective alternative to Sterling silver. Look great with Black buffalo handles - really "set them off".
Very fine polished finish, resist oxidation, so will remain bright for a long, long time.

We may CNC engrave these in house for you - on receipt of required detail or suitable graphic file - please enquire with us for this service - engraving costs are typically £4.75 per collar.

Cost effective alternative to Sterling silver. Look great with Black buffalo handles - really "set them off".
Very fine polished finish, resist oxidation, so will remain bright for a long, long time.

We may CNC engrave these in house for you - on receipt of required detail or suitable graphic file - please enquire with us for this service - engraving costs are typically £4.75 per collar.

Fine Nickel silver rings with internal flange which will "butt" against top of shank and base of handle to assist in the neatest of assemblies. Gentle convex outer surface to set off the finish.
Subtle, quality accessory that will set any stick off.

Nicely made spun brass collar with subtle defining bead top and bottom. Collars have rudimentary threading to improve "take" of adhesive on fitting.

Practical finishing touch for any stick.

We may CNC engrave these in house for you - on receipt of required detail or suitable graphic file - please enquire with us for this service - engraving costs are typically £4.75 per collar.

Tube cut brass collars in popular diameters

Sterling (925) Silver collar, our own manufacture & carrying Edinburgh Hallmark. These will add a unique quality statement to any stick. The combination of Buffalo horn and silver, in particular, shows fine contrasting tone.

We may CNC engrave these in house for you - on receipt of required detail or suitable graphic file - please enquire with us for this service - engraving costs are typically £4.00 per collar.

Plain "Tubecut" 925 Sterling silver collar 0.8mm - nice substantial pieces with our own Edinburgh Hallmark.
A quality finishing touch.

We may CNC engrave these in house for you - on receipt of required detail or suitable graphic file - please enquire with us for this service - engraving costs are typically £4.00 per collar.

Nicely made spun copper collar with subtle defining bead top and bottom. Collars have rudimentary threading to improve "take" of adhesive on fitting.

Practical finishing touch for any stick.

We may CNC engrave these in house for you - on receipt of required detail or suitable graphic file - please enquire with us for this service - engraving costs are typically £4.75 per collar.

Our most popular collars by far, these work best when "sleeved" over the joint between handle and head. Simple and effective, high polished finish, 3 practical sizes. Good volume discounts 20pcs+.

Like little "napkin rings" in appearance these collars are turned from solid Water Buffalo Horn. Offering a nice defining practical feature to finish any stick and with varying degrees of striking graining to each individual piece. 21, 23 & 25mm internal diameters available.
Work best when very slightly rebated ("checked in") to joint.

Iron, nickel plated, alpine spike, various sizes (measured on internal diameter, open end ).

German manufactured, very hard vulcanised rubber ferrules, very hard wearing. Steel inserts. 12mm - 22mm fittings.
The larger, heavier 22mm ferrule is intended for wading sticks, for which it is excellent.

Traditional fine tapered Nickel silver beaded crop collars in 4 sought after sizes.
Gents 43mmL x 20/24mm
Ladies 38mmL x 16/19mm
Ladies short 32mmL x 18/19mm
Childs 32mmL x 14.5 - 16mm

We may CNC engrave these in house for you - on receipt of required detail or suitable graphic file - please enquire with us for this service - engraving costs are typically £4.75 per collar.

Fine plain ( non beaded ) traditionally proportioned Gent's, Ladies & Child's size crop collars.

We may CNC engrave these in house for you - on receipt of required detail or suitable graphic file - please enquire with us for this service - engraving costs are typically £4.75 per collar.